Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Clean Mounting Surfaces

A clean surface is essential for a good seal. Use a rag dampened with an all-purpose cleaner or mineral spirits to thoroughly clean the back of the overflow cover plate and the area on the bathtub wall where the gasket sits. Remove all soap scum, mineral deposits, and any residue from the old gasket.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Clean Mounting Surfaces

A clean surface is essential for a good seal. Use a rag dampened with an all-purpose cleaner or mineral spirits to thoroughly clean the back of the overflow cover plate and the area on the bathtub wall where the gasket sits. Remove all soap scum, mineral deposits, and any residue from the old gasket.

Videos for this step

Clean Tank and Bowl SurfacesRemove Excess PuttyClean the Glass Edge

Tools and Materials

← Project

How to Replace a Bathtub Overflow Drain Gasket

Step 4 of 9·56 min left

Gather Tools and Prepare Workspace
10 mins3 itemsBeginner
Remove the Overflow Cover Plate
5 mins1 itemsBeginner
Extract the Old Gasket
5 mins3 itemsIntermediate
4
Clean Mounting Surfaces
5 mins3 itemsBeginner
5
Install the New Gasket
5 mins1 itemsIntermediate
6
Reinstall the Cover Plate
5 mins3 itemsBeginner
7
Test for Leaks
10 mins2 itemsBeginner
8
Create Drywall Access Panel (If Needed)
30 mins7 itemsAdvanced
9
Repair Drywall Access Panel
1 min9 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.