Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Preparation and Safety

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Begin by preparing the work area for a safe and clean project. Clear everything from the under-sink cabinet. Turn off the hot and cold water supply by twisting the shutoff valves clockwise until they stop. Turn the faucet on to release any remaining pressure and water in the lines. Place a bucket and some old towels under the drain pipes (P-trap) to catch any residual water during disassembly. If there is a garbage disposal, disconnect it from the power source. If it's hardwired, turn off the corresponding circuit breaker at the main electrical panel.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Preparation and Safety

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Begin by preparing the work area for a safe and clean project. Clear everything from the under-sink cabinet. Turn off the hot and cold water supply by twisting the shutoff valves clockwise until they stop. Turn the faucet on to release any remaining pressure and water in the lines. Place a bucket and some old towels under the drain pipes (P-trap) to catch any residual water during disassembly. If there is a garbage disposal, disconnect it from the power source. If it's hardwired, turn off the corresponding circuit breaker at the main electrical panel.

Videos for this step

Turn Off Power and Water SupplyDisconnect PlumbingPreparation and Removal of Old Unit

Tools and Materials

← Project

How to Install an Undermount Kitchen Sink

Step 1 of 9·3.8 hr left

1
Preparation and Safety
30 mins4 itemsIntermediate
2
Disconnect Plumbing and Disposal
45 mins5 itemsAdvanced
3
Remove the Old Sink
1 min6 items
4
Clean the Countertop Surface
45 mins4 itemsAdvanced
5
Prepare the New Sink
45 mins8 itemsAdvanced
6
Mount and Support the Sink
30 mins6 items
7
Install Mounting Clips
1 min9 items
8
Reconnect Plumbing
1 min5 itemsAdvanced
9
Final Checks and Cleanup
30 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.