Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Install Drain and Overflow Hoses

Your water softener has two hoses that need to be routed to a drain. The first is the main drain line from the control valve, which expels brine and backwash water during regeneration. The second, smaller hose is the brine tank overflow line. Cut the provided flexible drain tubing to length and attach it to the control valve's drain fitting, securing it with a clamp if provided. Route this tubing to the floor drain or standpipe, ensuring there is an air gap of at least 1.5 inches between the end of the tube and the drain to prevent back-siphoning. Do the same for the brine tank overflow hose, routing it to the same drain.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Install Drain and Overflow Hoses

Your water softener has two hoses that need to be routed to a drain. The first is the main drain line from the control valve, which expels brine and backwash water during regeneration. The second, smaller hose is the brine tank overflow line. Cut the provided flexible drain tubing to length and attach it to the control valve's drain fitting, securing it with a clamp if provided. Route this tubing to the floor drain or standpipe, ensuring there is an air gap of at least 1.5 inches between the end of the tube and the drain to prevent back-siphoning. Do the same for the brine tank overflow hose, routing it to the same drain.

Videos for this step

Connect the Brine Tank Overflow DrainInspect Drain LineTest the Connection for Leaks

Tools and Materials

← Project

How to Install a Whole-House Water Softener

Step 6 of 9·1.5 hr left

Choose the Installation Location
30 mins3 itemsBeginner
Shut Off Water and Power
20 mins4 itemsBeginner
Cut the Main Water Line
30 mins3 itemsAdvanced
Install Bypass Valve and Fittings
1 min11 items
Connect the Softener to the Bypass
1 min11 itemsAdvanced
6
Install Drain and Overflow Hoses
30 mins5 itemsBeginner
7
Turn on Water and Check for Leaks
30 mins1 itemsIntermediate
8
Set Up and Program the Softener
30 mins3 itemsIntermediate
9
Run a Manual Regeneration Cycle
2 mins3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.