Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Install the Fitting and Arrestor

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

First, prepare the arrestor assembly. Wrap the male threads of the water hammer arrestor with 3-4 layers of Teflon tape, wrapping in the same clockwise direction that you will tighten it. Screw the arrestor into the threaded port of the push-to-connect T-fitting and hand-tighten. Use an adjustable wrench to give it a final quarter-turn to snug it up. Now, take the entire T-fitting assembly and push one end firmly onto one of the cleaned copper pipes until it bottoms out. You may hear or feel a 'click'. Then, align and push the other end of the T-fitting onto the other pipe end. Ensure both sides are pushed on completely. Repeat this entire process for the second water line (e.g., the hot water line for the washing machine).

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Install the Fitting and Arrestor

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

First, prepare the arrestor assembly. Wrap the male threads of the water hammer arrestor with 3-4 layers of Teflon tape, wrapping in the same clockwise direction that you will tighten it. Screw the arrestor into the threaded port of the push-to-connect T-fitting and hand-tighten. Use an adjustable wrench to give it a final quarter-turn to snug it up. Now, take the entire T-fitting assembly and push one end firmly onto one of the cleaned copper pipes until it bottoms out. You may hear or feel a 'click'. Then, align and push the other end of the T-fitting onto the other pipe end. Ensure both sides are pushed on completely. Repeat this entire process for the second water line (e.g., the hot water line for the washing machine).

Videos for this step

Prepare and Install the ConnectorPrepare Pipe Fittings with Teflon TapePrepare Water Supply Outlet

Tools and Materials

← Project

How to Install a Water Hammer Arrestor to Stop Banging Pipes

Step 5 of 7·40 min left

Diagnose and Locate the Problem
15 minsBeginner
Shut Off Water and Drain the Pipes
20 mins2 itemsIntermediate
Cut the Pipe
10 mins6 itemsAdvanced
Deburr and Clean Pipe Ends
5 mins2 itemsIntermediate
5
Install the Fitting and Arrestor
15 mins4 itemsAdvanced
6
Restore Water and Check for Leaks
15 mins1 itemsIntermediate
7
Test the System
10 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.