Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Inspect and Clean the Faucet Cartridge

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

If cleaning the sprayer head did not solve the issue, the problem may be a clogged faucet cartridge. Ensure the water is still off. Locate the set screw that holds the faucet handle in place, which is often hidden under a small decorative cap (hot/cold indicator) or at the base of the handle. Use a small flathead screwdriver to pry off the cap, and an Allen wrench or Phillips screwdriver to loosen the set screw and remove the handle. Next, unscrew the decorative dome cap covering the cartridge, then use channel-lock pliers to unscrew the retaining nut holding the cartridge in place. Carefully pull the cartridge straight up and out of the faucet body. Inspect the cartridge's inlet ports for debris and rinse it under water. Also, inspect the inside of the faucet body for any visible sediment and wipe it out with a rag.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Inspect and Clean the Faucet Cartridge

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

If cleaning the sprayer head did not solve the issue, the problem may be a clogged faucet cartridge. Ensure the water is still off. Locate the set screw that holds the faucet handle in place, which is often hidden under a small decorative cap (hot/cold indicator) or at the base of the handle. Use a small flathead screwdriver to pry off the cap, and an Allen wrench or Phillips screwdriver to loosen the set screw and remove the handle. Next, unscrew the decorative dome cap covering the cartridge, then use channel-lock pliers to unscrew the retaining nut holding the cartridge in place. Carefully pull the cartridge straight up and out of the faucet body. Inspect the cartridge's inlet ports for debris and rinse it under water. Also, inspect the inside of the faucet body for any visible sediment and wipe it out with a rag.

Videos for this step

Inspect and Clean the Sprayer HeadClean the Faucet AeratorDiagnose and Clean Spray Head Check Valve

Tools and Materials

← Project

How to Fix Low Water Pressure in a Single Faucet

Step 3 of 4·30 min left

Shut Off Water and Remove Sprayer Head
5 mins2 itemsBeginner
Clean and Soak the Sprayer Head
60 mins4 itemsBeginner
3
Inspect and Clean the Faucet Cartridge
15 mins6 itemsAdvanced
4
Flush Supply Lines and Reassemble
15 mins4 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.