Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Clean the Pipe Exterior

For solder to adhere, the copper surface must be perfectly clean and free of oxidation. Use a dedicated pipe cleaning brush or a strip of sanding cloth (emery cloth) to thoroughly clean the outside of the pipe end. Sand the surface for a distance slightly greater than the depth of the fitting socket. The goal is to remove the dull outer layer until the copper is bright, shiny, and salmon-colored. Wipe away any dust with a clean, dry rag.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Clean the Pipe Exterior

For solder to adhere, the copper surface must be perfectly clean and free of oxidation. Use a dedicated pipe cleaning brush or a strip of sanding cloth (emery cloth) to thoroughly clean the outside of the pipe end. Sand the surface for a distance slightly greater than the depth of the fitting socket. The goal is to remove the dull outer layer until the copper is bright, shiny, and salmon-colored. Wipe away any dust with a clean, dry rag.

Videos for this step

Clean the Pipe ExteriorClean the Pipe EndsPrepare Surfaces for Soldering

Tools and Materials

← Project

How to Cut and Prepare Copper Pipe for a Perfect Joint

Step 4 of 5·3 min left

Measure and Mark the Pipe
2 mins5 itemsBeginner
Cut the Copper Pipe
3 mins3 itemsIntermediate
Deburr the Pipe Interior and Exterior
2 mins4 itemsIntermediate
4
Clean the Pipe Exterior
2 mins3 itemsBeginner
5
Clean the Fitting Interior
1 min3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.