Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Deburr the Pipe Interior and Exterior

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

The cutting process creates a small ridge, or 'burr', on the inside edge of the pipe. This must be removed to ensure proper water flow and prevent turbulence. Use a deburring tool, the triangular reamer on the back of many tubing cutters, or a round file. Insert the tool into the pipe opening and twist it several times to shave off the burr, creating a smooth, beveled inner edge. Also, lightly file the outside edge to remove any sharpness or external burrs.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Deburr the Pipe Interior and Exterior

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

The cutting process creates a small ridge, or 'burr', on the inside edge of the pipe. This must be removed to ensure proper water flow and prevent turbulence. Use a deburring tool, the triangular reamer on the back of many tubing cutters, or a round file. Insert the tool into the pipe opening and twist it several times to shave off the burr, creating a smooth, beveled inner edge. Also, lightly file the outside edge to remove any sharpness or external burrs.

Videos for this step

Remove BurrsDeburr and Clean the PipeDeburr and Chamfer Pipe

Tools and Materials

← Project

How to Cut and Prepare Copper Pipe for a Perfect Joint

Step 3 of 5·5 min left

Measure and Mark the Pipe
2 mins5 itemsBeginner
Cut the Copper Pipe
3 mins3 itemsIntermediate
3
Deburr the Pipe Interior and Exterior
2 mins4 itemsIntermediate
4
Clean the Pipe Exterior
2 mins3 itemsBeginner
5
Clean the Fitting Interior
1 min3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.