Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Once the solder joints have completely cooled, reinstall the valve cartridge according to the manufacturer's directions. Place a rag or small bucket inside the wall under the valve. Go to the main water shutoff and turn it on SLOWLY. Listen for the sound of pipes filling. Return to the access panel and meticulously inspect every solder joint for any drips or beads of water. If you find a leak, you will need to shut off the water, drain the system, and re-solder the faulty joint. Also, test the valve function by turning the handle to run water to the tub spout and shower head.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Once the solder joints have completely cooled, reinstall the valve cartridge according to the manufacturer's directions. Place a rag or small bucket inside the wall under the valve. Go to the main water shutoff and turn it on SLOWLY. Listen for the sound of pipes filling. Return to the access panel and meticulously inspect every solder joint for any drips or beads of water. If you find a leak, you will need to shut off the water, drain the system, and re-solder the faulty joint. Also, test the valve function by turning the handle to run water to the tub spout and shower head.

Videos for this step

Test for LeaksTurn Water On and Test for LeaksRestore Water and Test

Tools and Materials

← Project

How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve

Step 7 of 9·2.7 hr left

Preparation and Safety
20 mins2 itemsBeginner
Create Wall Access
30 mins7 itemsAdvanced
Remove Old Faucet Trim
20 mins2 itemsIntermediate
Demolish Old Valve
45 mins3 items
Prepare for New Valve Installation
60 mins10 itemsAdvanced
Solder the New Valve
60 mins7 items
7
Test for Leaks
30 mins4 itemsIntermediate
8
Repair the Access Wall
90 mins11 itemsAdvanced
9
Install New Trim Kit
40 mins4 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.