Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Test for Leaks

The final step is to verify your work. Run a significant amount of water through the newly connected drain line. A bucket of water or flushing an upstream toilet multiple times works well. While the water is flowing, carefully inspect the connection point where the PVC enters the cast iron hub. Look and feel for any signs of moisture or dripping. If any leak is detected, the pipe may need to be removed and reseated.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Test for Leaks

The final step is to verify your work. Run a significant amount of water through the newly connected drain line. A bucket of water or flushing an upstream toilet multiple times works well. While the water is flowing, carefully inspect the connection point where the PVC enters the cast iron hub. Look and feel for any signs of moisture or dripping. If any leak is detected, the pipe may need to be removed and reseated.

Videos for this step

Check for LeaksFinal System Flush and TestPressure Test Water Lines

Tools and Materials

← Project

How to Connect PVC Drain Pipe to a Cast Iron Hub

Step 7 of 7·5 min left

Safety and Area Preparation
5 mins2 itemsBeginner
Excavate the Old Seal from the Hub
30 mins6 items
Clean and Prepare Hub Interior
10 mins4 itemsIntermediate
Prepare the PVC Pipe End
5 mins2 itemsBeginner
Install the Compression Gasket
5 mins3 itemsIntermediate
Insert and Seat the PVC Pipe
5 mins4 itemsAdvanced
7
Test for Leaks
5 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.