Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Insert and Seat the PVC Pipe

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Apply plumber's grease or soapy water to the beveled end of the PVC pipe and to the inside surface of the installed donut gasket. Align the pipe with the center of the gasket. Using a firm, steady pushing and slight twisting motion, force the pipe into the gasket. The bevel should help guide it in. Push the pipe until it stops against the internal shoulder deep inside the hub. If it is difficult to push by hand, you can place a block of scrap wood on the other end of the pipe and gently tap it with a mallet to drive it home. Ensure the pipe is inserted straight and fully.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Insert and Seat the PVC Pipe

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Apply plumber's grease or soapy water to the beveled end of the PVC pipe and to the inside surface of the installed donut gasket. Align the pipe with the center of the gasket. Using a firm, steady pushing and slight twisting motion, force the pipe into the gasket. The bevel should help guide it in. Push the pipe until it stops against the internal shoulder deep inside the hub. If it is difficult to push by hand, you can place a block of scrap wood on the other end of the pipe and gently tap it with a mallet to drive it home. Ensure the pipe is inserted straight and fully.

Videos for this step

Install the SharkBite FittingPrepare Pipe and Install GasketTwist to Expand Gasket

Tools and Materials

← Project

How to Connect PVC Drain Pipe to a Cast Iron Hub

Step 6 of 7·10 min left

Safety and Area Preparation
5 mins2 itemsBeginner
Excavate the Old Seal from the Hub
30 mins6 items
Clean and Prepare Hub Interior
10 mins4 itemsIntermediate
Prepare the PVC Pipe End
5 mins2 itemsBeginner
Install the Compression Gasket
5 mins3 itemsIntermediate
6
Insert and Seat the PVC Pipe
5 mins4 itemsAdvanced
7
Test for Leaks
5 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.