Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Test for Leaks

Turn on the water supply to the shower. Check all new connections for any drips or leaks: where the diverter meets the shower arm, where the fixed head meets the diverter, and where the hose meets both the diverter and the handheld head. Operate the diverter valve to switch between the fixed head, the handheld head, and both (if applicable). If you see any leaks, turn off the water, and gently tighten the leaking connection another eighth of a turn. If it still leaks, you may need to disassemble, re-tape, and reassemble the connection.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Test for Leaks

Turn on the water supply to the shower. Check all new connections for any drips or leaks: where the diverter meets the shower arm, where the fixed head meets the diverter, and where the hose meets both the diverter and the handheld head. Operate the diverter valve to switch between the fixed head, the handheld head, and both (if applicable). If you see any leaks, turn off the water, and gently tighten the leaking connection another eighth of a turn. If it still leaks, you may need to disassemble, re-tape, and reassemble the connection.

Videos for this step

Attach Shower Head and Final TestCheck for LeaksTest for Leaks

Tools and Materials

← Project

How to Add a Handheld Shower Head Using a Shower Arm Diverter

Step 8 of 8·3 min left

Gather Tools and Prepare Work Area
5 mins4 itemsBeginner
Remove the Existing Shower Head
5 mins1 itemsBeginner
Clean Shower Arm Threads
5 mins1 itemsBeginner
Apply New Plumber's Tape
2 mins1 itemsBeginner
Install the Shower Arm Diverter
5 mins1 itemsBeginner
Attach Fixed Shower Head and Handheld Hose
5 mins4 itemsBeginner
Connect Handheld Head and Install Wall Mount
5 mins5 itemsBeginner
8
Test for Leaks
3 mins3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.