Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Clean Shower Arm Threads

Once the shower head is removed, inspect the threads on the end of the shower arm. Use a rag to wipe away any water and debris. If there is old, shredded plumber's tape or mineral buildup, use an old toothbrush or a small wire brush to gently clean the threads until they are clear of any residue.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Clean Shower Arm Threads

Once the shower head is removed, inspect the threads on the end of the shower arm. Use a rag to wipe away any water and debris. If there is old, shredded plumber's tape or mineral buildup, use an old toothbrush or a small wire brush to gently clean the threads until they are clear of any residue.

Videos for this step

Clean and Tape ThreadsRemove Old Showerhead and Clean ThreadsRemove Existing Showerhead

Tools and Materials

← Project

How to Add a Handheld Shower Head Using a Shower Arm Diverter

Step 3 of 8·25 min left

Gather Tools and Prepare Work Area
5 mins4 itemsBeginner
Remove the Existing Shower Head
5 mins1 itemsBeginner
3
Clean Shower Arm Threads
5 mins1 itemsBeginner
4
Apply New Plumber's Tape
2 mins1 itemsBeginner
5
Install the Shower Arm Diverter
5 mins1 itemsBeginner
6
Attach Fixed Shower Head and Handheld Hose
5 mins4 itemsBeginner
7
Connect Handheld Head and Install Wall Mount
5 mins5 itemsBeginner
8
Test for Leaks
3 mins3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.