Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Make Cuts for Obstacles and Edges

Measure and mark planks for cuts around obstacles. Use a jigsaw or handsaw for curved cuts around pipes or irregular shapes. For the final row, measure the remaining gap width and rip planks lengthwise to fit, remembering to account for the expansion gap. Ensure all cuts are clean and accurate for a professional finish.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Make Cuts for Obstacles and Edges

Measure and mark planks for cuts around obstacles. Use a jigsaw or handsaw for curved cuts around pipes or irregular shapes. For the final row, measure the remaining gap width and rip planks lengthwise to fit, remembering to account for the expansion gap. Ensure all cuts are clean and accurate for a professional finish.

Videos for this step

Cut Planks to FitCut and Fit PlanksCut End Board to Length & Use Pull Bar

Tools and Materials

← Project

Hardwood Flooring Installation

Step 6 of 9·19 min left

Acclimate Hardwood Flooring
72 minutes1 items
Prepare Subfloor
24 minutes7 items
Plan Floor Layout and Direction
3 minutes1 items
Install First Row of Planks
4 minutes3 items
Install Subsequent Rows
48 minutes9 items
6
Make Cuts for Obstacles and Edges
8 minutes6 items
7
Install Final Row
3 minutes7 items
8
Install Baseboards and Trim
6 minutes8 items
9
Clean Up
2 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.