Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Sand Patched Areas Smooth

Using a sanding block or a piece of sandpaper, begin by sanding the areas where the wood filler was applied. Start with a medium-grit sandpaper (e.g., 100-120 grit) to remove the excess filler and level it with the surrounding wood. Apply light to moderate pressure and sand in the direction of the wood grain. Once the filled areas are flush and smooth, switch to a fine-grit sandpaper (e.g., 180-220 grit) to further refine the surface, removing any sanding marks from the coarser grit and preparing it for finishing. Wipe away dust between grits.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Sand Patched Areas Smooth

Using a sanding block or a piece of sandpaper, begin by sanding the areas where the wood filler was applied. Start with a medium-grit sandpaper (e.g., 100-120 grit) to remove the excess filler and level it with the surrounding wood. Apply light to moderate pressure and sand in the direction of the wood grain. Once the filled areas are flush and smooth, switch to a fine-grit sandpaper (e.g., 180-220 grit) to further refine the surface, removing any sanding marks from the coarser grit and preparing it for finishing. Wipe away dust between grits.

Videos for this step

Sand Filled Areas SmoothSand Filled Areas SmoothSand the Repaired Area

Tools and Materials

← Project

How to Fill Nail and Staple Holes in Stairs After Carpet Removal

Step 4 of 5·1.1 hr left

Inspect and Clean Stair Holes
30 minutes4 items
Apply Wood Filler to Holes
60 minutes2 items
Allow Wood Filler to Dry
120 minutes1 items
4
Sand Patched Areas Smooth
45 minutes5 items
5
Clean and Prepare for Finishing
20 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.