Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Finish the Risers

This is where your design vision comes to life. After the adhesive has fully cured, apply your desired finish. Whether you're painting for a bright, clean look or staining to match your beautiful wood, patience is key. Apply thin, even coats, and always allow for the manufacturer's recommended drying time. Now that your risers look fantastic, you've created the perfect backdrop to add the finishing touch: a set of our treads where safety meets style.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Finish the Risers

This is where your design vision comes to life. After the adhesive has fully cured, apply your desired finish. Whether you're painting for a bright, clean look or staining to match your beautiful wood, patience is key. Apply thin, even coats, and always allow for the manufacturer's recommended drying time. Now that your risers look fantastic, you've created the perfect backdrop to add the finishing touch: a set of our treads where safety meets style.

Videos for this step

Caulk and Paint Risers and StringersPaint Risers and Caulk EdgesCaulk and Paint

← Project

DIY Stair Risers

Step 6 of 6·2 hr left

Measure Each Riser with Care
30 minutes
Choose and Cut Your Riser Material
60 minutes
Sand and Clean for a Smooth Finish
45 minutes
Dry-Fit Each Riser
20 minutes
Secure Your Risers
75 minutes
6
Finish the Risers
120 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.