Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Reassemble and Test

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully reassemble the faucet, replacing the escutcheon, handle, and other components. Slowly turn the water supply back on and check all connections for leaks. Tighten any loose fittings if necessary.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Reassemble and Test

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully reassemble the faucet, replacing the escutcheon, handle, and other components. Slowly turn the water supply back on and check all connections for leaks. Tighten any loose fittings if necessary.

Videos for this step

Reassemble Faucet and TestTest for LeaksTighten Retaining Nut and Test for Leaks

Tools and Materials

← Project

Delta Shower Cartridge Replacement: A Step-by-Step DIY Guide

Step 5 of 5·15 min left

Shut Off the Water Supply
5 mins1 itemsBeginner
Remove the Handle and Escutcheon Plate
15 mins1 itemsIntermediate
Remove the Old Cartridge
20 mins1 itemsAdvanced
Install the New Delta Cartridge
15 mins2 itemsIntermediate
5
Reassemble and Test
15 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.