Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Install the New Delta Cartridge

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully install the new Delta 17 Series (or appropriate model) cartridge. Make sure it's properly aligned and seated in the valve body. Tighten the retaining nut by hand—avoid over-tightening.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Install the New Delta Cartridge

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully install the new Delta 17 Series (or appropriate model) cartridge. Make sure it's properly aligned and seated in the valve body. Tighten the retaining nut by hand—avoid over-tightening.

Videos for this step

Install New CartridgesInstall new cartridge and handleInstall New Cartridge and Nut

Tools and Materials

← Project

Delta Shower Cartridge Replacement: A Step-by-Step DIY Guide

Step 4 of 5·30 min left

Shut Off the Water Supply
5 mins1 itemsBeginner
Remove the Handle and Escutcheon Plate
15 mins1 itemsIntermediate
Remove the Old Cartridge
20 mins1 itemsAdvanced
4
Install the New Delta Cartridge
15 mins2 itemsIntermediate
5
Reassemble and Test
15 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.