Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test for Stability and Squeaks

After visually and physically inspecting the components, perform a functional test. Walk up and down the stairs at a normal pace, deliberately putting weight on different parts of each step, especially near the edges and center. Listen carefully for any creaking or squeaking sounds. These noises often indicate that treads are rubbing against stringers or that fasteners have loosened. Try to pinpoint the exact location of the noise. Also, pay attention to any noticeable wobble or excessive flex in the stairs as you walk. Significant instability or loud, persistent squeaks warrant further investigation into the cause.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test for Stability and Squeaks

After visually and physically inspecting the components, perform a functional test. Walk up and down the stairs at a normal pace, deliberately putting weight on different parts of each step, especially near the edges and center. Listen carefully for any creaking or squeaking sounds. These noises often indicate that treads are rubbing against stringers or that fasteners have loosened. Try to pinpoint the exact location of the noise. Also, pay attention to any noticeable wobble or excessive flex in the stairs as you walk. Significant instability or loud, persistent squeaks warrant further investigation into the cause.

Videos for this step

Final Test and InspectionTest the Repaired StairsEliminate Squeaks from Treads

← Project

How to Check Stairs for Rot or Damage Before Covering Them

Step 5 of 5·15 min left

Inspect Treads and Risers for Surface Damage
30 minutes2 items
Probe for Soft Spots and Rot
45 minutes3 items
Check Stringer Integrity
30 minutes2 items
Assess Fastener Security
25 minutes3 items
5
Test for Stability and Squeaks
15 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.