Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Prepare the Caulk Tube

Using a utility knife or the cutting mechanism on a caulk gun, carefully cut the nozzle of the caulk tube at a 45-degree angle. Start with a small opening, as you can always cut more away if needed. The size of the opening will determine the width of the caulk bead. A smaller opening is recommended for beginners to ensure better control.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Prepare the Caulk Tube

Using a utility knife or the cutting mechanism on a caulk gun, carefully cut the nozzle of the caulk tube at a 45-degree angle. Start with a small opening, as you can always cut more away if needed. The size of the opening will determine the width of the caulk bead. A smaller opening is recommended for beginners to ensure better control.

Videos for this step

Prepare the Caulk TubePrepare the Caulk TubePrepare the Caulk Tube Nozzle

Tools and Materials

← Project

Bathtub Caulking

Step 4 of 8·30 min left

Remove Old Caulk
30 minutes2 items
Clean the Surface
15 minutes2 items
Apply Painter's Tape
10 minutes1 items
4
Prepare the Caulk Tube
2 minutes2 items
5
Apply New Caulk
15 minutes1 items
6
Smooth the Caulk Bead
10 minutes3 items
7
Remove Painter's Tape
3 minutes1 items
8
Allow Caulk to Cure
0 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.