Skip to main content

Install New Faucet Body — Position the Wrench Head

Beginner

Part of project

How to Use a Basin Wrench Like a Pro · Step 4 of 6

Helpful?

In this video

Take the new faucet assembly and carefully feed the attached hoses and wires down through the mounting hole in the countertop. Ensure the faucet base is seated correctly on the countertop surface. From underneath the sink, slide the plastic mounting bracket up over the hoses and onto the faucet's threaded shank. Follow this with the large brass mounting nut, threading it onto the shank by hand. Use the included plastic tightening tool to fully tighten the nut, securing the faucet assembly. Check the faucet's alignment from above to ensure it is straight. Finally, use a Phillips head screwdriver to tighten the two screws on the mounting bracket, which will clamp it against the underside of the counter and prevent the faucet from rotating.

Goal: Secure the new faucet to the countertop

  • Have someone hold the faucet in the correct position from above while you tighten it from below to ensure proper alignment.

Used in this video

  • Included plastic tightening tool (Tool Type: Faucet Wrench, Power Source: Manual) · optional — Tightening the mounting nut in the tight space under the sink.
  • Screwdriver (Tool Type: Screwdriver, Power Source: Manual, Handle Type: Phillips) · optional — Tightening the two securing screws on the mounting bracket.
11.5K views11025 minutes
DIYNorth

9K subscribers

View Channel

FAQs

Why do I need a basin wrench specifically for this project, and can I use a different wrench instead?

A basin wrench's swiveling head and long shaft are uniquely designed to reach and grip faucet mounting nuts in the confined space behind a sink basin. Standard wrenches, like adjustable or pipe wrenches, are usually too bulky or lack the necessary angle and reach, making the job nearly impossible. Using the correct tool prevents frustration and potential damage to components.

What are the most important safety precautions when working in a tight space under a sink with a basin wrench?

Always wear safety glasses to protect your eyes from debris or drips. Ensure the area is well-lit (a headlamp like the Husky PVL-HLP-0004 is ideal) to clearly see the nuts and avoid injuries. Crucially, turn off the water supply to the faucet before starting to prevent unexpected leaks or sprays.

How long does it typically take for a beginner to successfully use a basin wrench, especially if nuts are corroded?

For a beginner, expect 30 minutes to an hour for removal and installation under typical conditions. If nuts are severely corroded or the space is exceptionally tight, it could take longer, potentially requiring repeated application of penetrating oil. Patience is key to avoid stripping the nuts and ensure a successful outcome.

What should I do if the faucet nuts are severely corroded and won't budge with the basin wrench?

Apply a generous amount of penetrating oil like KROIL and let it soak for at least 15-30 minutes, or even longer for stubborn nuts. Reapply and try again, using short, firm, counter-clockwise turns. For very stuck nuts, gently tap the wrench or nut (if accessible) to help break the corrosion bond after applying oil.

Transcript
Hide

The first step of the installation is just take the entire faucet assembly, shove all the hoses down the hole and just pull everything through. Pretty straightforward. Now, because I have a stone or granite countertop, I don't have to worry about the faucet touching anything metal. Obviously, if you have a metal sink and it's touching the metal on the sink, you could have issues with the touch faucets. So you have to make sure that the threaded metal portion of that thing is not touching anything on the sink. It does come with a handy tool to screw the nut on that's going to secure the faucet to the sink. And to tighten the entire faucet down, I'm going to put on the mounting bracket, which is the square plastic piece. It does have to get oriented in a specific direction. You can see the braided hose was fed through the bracket and then all the PEX tubing actually has a little slot on the one side of the bracket. So that does not get threaded through that hole with everything. And then I'm just going to take that brass nut and I'm going to screw that onto the bottom of the faucet and tighten it up until the faucet is secured against the counter. Now you do have to make sure that the faucet is oriented straight. There's like a little, it says dealt on the faucet. Obviously that's going to point towards the front and the there's a little light on it as well. And that has to point forward. Obviously it's pretty easy to center this thing, particularly because I have covered doors on both sides of my sink for some, some reason. I'm not really sure why, but it definitely makes installing a faucet a lot easier when you can access it from both sides. And then there's two screws on the bottom of the bracket and you just tighten those up very straightforward and it goes on nice and secure.

Auto-generated transcript. May contain errors.