Skip to main content

Square and Secure One Side of the Ladder — Position and Secure Ladder Frame

Beginner5 hours

Part of project

How to Install a Pull-Down Attic Ladder · Step 4 of 7

Helpful?

In this video

With the attic ladder temporarily secured in the opening, begin the process of permanently fixing it in place. Carefully maneuver one side of the attic ladder frame so that it sits hard against one of the newly installed noggins, ensuring it is perfectly flush and square. Once this alignment is achieved, open the attic ladder door. It is absolutely imperative to clear the area underneath the ladder of all people and objects before opening to prevent any potential injuries. Climb a separate, stable ladder or stand on saw horses to access the inside of the ladder frame from the attic space. Using your drill, pre-drill pilot holes into the hardwood noggin. Then, drive three 75mm wood screws through the attic ladder frame into the noggin. Place one screw approximately 100mm from each end and the third screw directly in the middle for even support.

908.2K views3.7K