Skip to main content

Reinforce Joists with New Lumber (Sistering) — Reinforce Joists (If Necessary)

Beginner5 hours

Part of project

How to Install a Pull-Down Attic Ladder · Step 3 of 7

Helpful?

In this video

Once the ceiling is cut, return to the attic. The existing ceiling joists that were cut now need to be reinforced to support the attic ladder frame. Measure and cut new pieces of lumber (noggins) to fit snugly between the remaining sections of the existing joists, forming a rectangular frame around the opening. Use a T-square to ensure the frame is perfectly square. Secure these new lumber pieces in place by screwing them into the existing joists using a drill/driver and screws. This creates a strong, load-bearing frame for the attic ladder.

44.5K views930
Transcript
Hide

we have our cutting for the loft hatch now obviously you got the ceiling joists here both of them this is the timber so we're gonna go across there to hold them two together so i'm gonna do the thickness of that i'm gonna cut it back using one of these make a square put it like that cut them back put a trimmer like that so then we can screw it from there and you'll be supporting them too do the same all the way around so basically what we're doing you're creating a frame all around this ridge where the loft hat is going to go so we kept the two ceiling joists there you got your pearling here so because we need to be flush with the purling instead of me putting a trimmer all the way and then obviously this one can screw from that way did i fill them up with noggins in the middle so obviously it's flush with our pearling so he keep keeps the loft hatch more this way that's what we want to keep our head height on the ridge of bed absolutely spot on so so i'm doing now i cut two bits of timber but to be one i'm gonna screw them lava in both edges of the loft hut so one that and one there so what this does is when you drop the loft hatch from the loft

Auto-generated transcript. May contain errors.