Install Structural Support Blocks and Stringer Reinforcement — Reinforce Stair Structure (If Necessary)
Part of project
How to Make Steep Basement Stairs Safer · Step 5 of 5
In this video
After gaining access, remove any existing wedges that are no longer providing sufficient support. Cut and install new support blocks made from sturdy lumber (e.g., 2x4, 2x6, 2x8, or 2x12) under the treads. It's recommended to use pressure-treated lumber if there's any risk of moisture. These blocks should be cut level, not at the same slope as the dadoed stringer. Ensure the top surface of each new block aligns perfectly with the top line of the dado slot in the stringer. You can also use wider lumber or stack multiple pieces of narrower lumber (e.g., two 1x4s instead of one 1x8) to achieve the desired support and fit.
Install Structural Support Blocks and Stringer Reinforcement — Reinforce Stair Structure (If Necessary)
Part of project
How to Make Steep Basement Stairs Safer · Step 5 of 5
In this video
After gaining access, remove any existing wedges that are no longer providing sufficient support. Cut and install new support blocks made from sturdy lumber (e.g., 2x4, 2x6, 2x8, or 2x12) under the treads. It's recommended to use pressure-treated lumber if there's any risk of moisture. These blocks should be cut level, not at the same slope as the dadoed stringer. Ensure the top surface of each new block aligns perfectly with the top line of the dado slot in the stringer. You can also use wider lumber or stack multiple pieces of narrower lumber (e.g., two 1x4s instead of one 1x8) to achieve the desired support and fit.