Skip to main content

Sand and Finish Bench — Sand and Prepare for Finishing

Beginner3 mins

Part of project

How to Build a Built-In Bench on a Stair Landing · Step 7 of 9

Helpful?

In this video

Thoroughly sand the entire bench, including the top, legs, and all joints, using an orbital sander. Start with a coarser grit sandpaper (e.g., 80-100 grit) to remove any tool marks or significant imperfections, then progress through finer grits (e.g., 120, 150, 180, 220) until all surfaces are smooth to the touch (4:52-4:54). Collect some fine sawdust and mix it with wood glue to create a custom wood filler (4:55-4:57). Use this mixture to fill any remaining small gaps, cracks, or imperfections in the wood (4:57-5:00). Allow the filler to dry completely, then sand the filled areas smooth (5:00-5:02). Once all sanding is complete, clean the bench thoroughly to remove all dust. Apply an appropriate outdoor finish, such as a spar varnish, outdoor oil, or wipe-on polyurethane, to protect the wood from elements and enhance its natural beauty. Apply according to product instructions, typically wiping on and then wiping off excess (5:03-5:07). Allow adequate drying time between coats and before final use.

41.6K views3.2K