Skip to main content

Install MDF Wall Supports — Install Wall Supports or Brackets

Beginner8 hours

Part of project

How to Add Shelves Inside an Under-Stair Closet · Step 6 of 8

Helpful?

In this video

Use a stud finder to locate the vertical studs in the wall where each shelf support will be installed. Mark the center of each stud with painter's tape or a pencil. Once all studs are marked, position the cut MDF support boards against the wall at the desired shelf height. Use a level to ensure the board is perfectly horizontal before securing it. If using a nail gun, use 2-inch brad nails to fasten the MDF board into each stud. If using a hammer, use 2-inch finish nails. If a stud isn't perfectly aligned with the end of a short MDF piece, extend the MDF past the shelf to ensure it reaches a stud for secure attachment; this will be hidden by paint later.

13.4K views318