Skip to main content

Wire the Sensor and Fixture — Install the Control Sensor/Timer

Beginner4 hours

Part of project

How to Add a Dusk-To-Dawn or Timer Control to Stair Lights · Step 2 of 5

Helpful?

In this video

With the power confirmed off, begin making the electrical connections. First, connect the green (ground) wire from the house to the ground wire of the light fixture, tightening it securely with a screwdriver. Next, gather all the white (neutral) wires: the neutral wire from the house, the neutral wire from the light fixture, and the white neutral wire from the new dusk-to-dawn sensor. Twist these three wires together clockwise using pliers and secure them with an orange wire nut, ensuring a tight connection. Then, take the black (hot) wire from the house and connect it to the black (hot input) wire of the dusk-to-dawn sensor, twisting them together clockwise with pliers and securing with an orange wire nut. Finally, connect the red (load output) wire from the dusk-to-dawn sensor to the black (hot) wire of the light fixture, twisting them together clockwise and securing with an orange wire nut. Double-check all connections to ensure they are firm and properly insulated by the wire nuts.

169.0K views1.1K