Skip to main content

Measure Window Opening

Beginner2 hours

Part of project

How to Install a Cordless Shade on a Stairwell Window · Step 1 of 5

Helpful?

In this video

Remove the existing temporary blackout shade from the window. Using a tape measure, carefully measure the width of the window opening in three locations (top, middle, and bottom). Record the smallest of these three measurements accurately to within 1/16th of an inch. Next, measure the height of the window opening in three locations (left, middle, and right) and record the smallest measurement to within 1/8th of an inch. Emphasize that the smallest measurements are critical for an inside mount, and avoid making them too tight.

991 views12
Transcript
Hide

measured and ordered I'm going to go and show you how to measure first so let's get this thing off there you go and let there be lights so let's go ahead first of of all and let me show you how you're going to measure for these so if I am doing an inside mount it is relatively simple we are just going to measure in three locations actually I'm going to need this because this window is pretty tall this is a 10t ceiling room so you're going to take three measurements and make note of it you're going to go at the bottom I have exactly this one's about 34 and A4 I'm going to come up and I'm going to pick about Midway I'm going to measure again this one 34 and A4 and this one is 34 so what you're going to do is you are going to take the smallest measurement to within a 16th of an inch and that is what you're going to write down and that's what you're going to order so mine will be 34 very important do not make that too tight that's where I messed up and you'll see in a minute when I go to try to put the shade in I'm going to have a little trouble but we're going to fix that that is how you're going to measure the width now you do the same thing with the length you're going to measure especially if you are an inside mount inside mount we measure meure at the three locations we have 70 come over here I have 70 and about A4 and I have 70 and A4 so what we are going to do is take our smallest measurement we're going to do the 70 and that way it will be able to go down all the way to the bottom without any problem and you don't have a bunch of bunch up cuz if you do it too long you'll have a problem there but they are automatically going to add a little bit to that and you're going to set an upper and a lower

Auto-generated transcript. May contain errors.