Skip to main content

Plan Placement and Mark Mounting Points — Mark Mounting Holes

Beginner3 hours

Part of project

How to Install Wall Hooks and a Coat Rack in an Entry · Step 2 of 4

Helpful?

In this video

The installer identifies the desired location for the 8-hook dark walnut coat rack within a wooden closet, noting that the specific unit required a slight trim to fit the space (though the trimming process itself is not shown). He then locates the pre-drilled mounting holes on the coat rack's integrated backing plate. To ensure the coat rack is installed perfectly level, a small spirit level is placed on its top edge. Once the coat rack is held in the correct and level position, the tip of the provided screwdriver is used to create an initial indentation, marking the precise location on the wall where the first mounting screw hole will be drilled.

721 views31
Transcript
Hide

here, it keeps them in place. So today I'm going to show you how to basically mount it. So this does come in four, six and eight iterations. This one is eight. This one's 21.8. They don't want a 17.7. We did have to trim it just a little bit to fit in this closet. Now we're basically going to, there's a mount and screw right there. And they gave you a screwdriver and they gave you pretty much everything you need. This we essentially just kind of stick right here and this will give us the level that we need. Once we're happy with the level then we're going to basically mark our screw hole.

Auto-generated transcript. May contain errors.