Skip to main content

Install Coat Rack to Wall Using Anchors — Determine Mounting Location

Beginner3 hours

Part of project

How to Install Wall Hooks and a Coat Rack in an Entry · Step 1 of 4

Helpful?

In this video

To install the coat rack securely on the wall, first determine the desired height and location. Use a stud finder to locate wall studs; if possible, mount the coat rack directly into at least two studs using screws for maximum strength. If studs are not available at the desired locations, you must use appropriate wall anchors. For drywall, consider toggle bolts or self-drilling drywall anchors for heavier loads. For plaster or masonry walls, use expansion anchors. Mark the screw hole positions on the wall, pre-drill according to the anchor manufacturer's instructions, insert the anchors, and then mount the coat rack using screws through its pre-drilled holes into the anchors. Use a level to ensure the coat rack is perfectly straight before tightening all screws.

19.5K views909
Transcript
Hide

closey. So, that's it, folks. What do you reckon? My first ever 30inut challenge. I think it turned out okay. Great tip, Knackers. Well, I hope you enjoyed and found useful the first ever 30inut challenge. I had a great time doing it, even though at the end it got a bit tight. And it's amazing what you can do in under 30 minutes if you have everything ready beforehand. All righty. As per usual, a big thumbs up is greatly appreciated. And if this is your first time to my channel, hit that subscribe button so you don't miss out on any future 30inut challenges or any other project for that matter. And if by some chance you'd like to pick up some of these vintage wire hooks and you live in Australia, I'll leave a link to that in the description box down below. So, make sure you check that out. All righty. I need a cup of tea and this needs to go up on a wall. So, till next time, I'm out of here.

Auto-generated transcript. May contain errors.