Skip to main content

Review Key Staircase Measurements and Regulations — Verify Stair Slope and Riser/Tread Ratio

Beginner2 hours

Part of project

How to Calculate Rise and Run for Deck Stairs · Step 6 of 6

Helpful?

In this video

The speaker elaborates on the importance of specific measurements. Headroom is the vertical distance from the top of a tread to the ceiling or obstruction directly above; in his area, the minimum is 76 3/4 inches, though 80 inches is preferred for comfort and moving furniture. Riser height can range from 5 3/4 to 8 inches. Nosing is the overhang of the tread beyond the riser, typically about 1 inch. The minimum depth of the tread is specified as 9 1/4 inches. He also mentions stringer material, suggesting 2x12s for interior stairs to ensure sufficient 'meat' (thickness) after cutting the notches for treads and risers (minimum 3.5 inches of material should remain).

9.2K views429
Transcript
Hide

uh so for stairs here's a here's a simple drawing and you can see this is the Stringer so that's the wood that's cut out to support the steps okay we've got the Riser which is the vertical piece of wood underneath each step and we've got the tread which is of course uh the part that you walk on those are the three main pieces of stair that you need to uh know the terminology for now Headroom is the amount of room that you have when you're standing on the last on the tread that's right underneath whatever the bulkhead is or the ceiling in the level that you're going down to so that's the head room and there's a minimum distance for that in my area at 76 and 3/4 uh it's nice to have at least 80 in honestly in our case we're going to have about 7et 84 in so we've got lots of headro Riser height can range from 5 and 3/4 to 8 in in my area so that's the distance from top of tread to top of tread okay uh nosing that's the little overhang right here okay it's the it's the amount of the tread that overhangs the Riser from the front of the Riser forward and generally rule of thumb here is about an inch uh depth of Treads which is basically from an imaginary line uh from the front of the riser to front of Riser so basically from here to here here okay and they they like to see that uh minimum 9 and A4 okay so those are kind of some of the main code related regulations that you're going to have to fall into also when you're choosing your stringer material 2 by10 2 x 12s when when you've got this cut out they want to see about three and a half inches of of uh thickness left from the back of the notch of the cut to the underside okay now for most stairs they're built correctly uh with the right tread and and riser and everything 2x1 12 is probably most times what people will be using if you're doing a deck set of stairs you might be able to get away with 2 by10 A lot of times there're a little uh more of a rise on each step you know close to the 8 in Mark uh which changes your angle and and everything and usually will give you a little more meat back there left but 2 by 12 for interior stairs is pretty standard um now some of the things we need to

Auto-generated transcript. May contain errors.