Skip to main content

Final Clean with White Spirit — Apply chosen cleaning solution to tape residue

Beginner2 hours

Part of project

How to Remove Sticky Tape Residue from Wood Stairs Without Damage · Step 2 of 6

Helpful?

In this video

Even after scraping, there might be some stubborn, tiny bits of adhesive residue remaining. To address these, apply a small amount of White Spirit to a fresh, clean rag. Rub the rag over the entire surface where stickers were present, focusing on any remaining sticky spots. White spirit is highly effective at dissolving adhesive and degreasing the surface, leaving it clean and smooth. Continue rubbing and buffing the surface with the rag until all residue is gone and the wood is clean. For best results, use a separate, clean rag to dry and shine the surface after the white spirit has done its work. The surface should now be as good as new, ready for any further restoration or finishing.

1.8K views105
Transcript
Hide

cleaning up the surface. Now with another rag, I'm just going to go back in again just to finally clean all the residue off the surface with a bit more wide spirit. And now you can see the surface is as good as new. In summary then, all these products have their own uses depending on what you're trying to achieve. If you don't have too

Auto-generated transcript. May contain errors.