Skip to main content

Apply Cleaning Solution to Carpet — Prepare DIY Cleaning Solution

Beginner8 hours

Part of project

How to Deep Clean Carpet Without a Machine · Step 3 of 7

Helpful?

In this video

Before applying any liquid, ensure the carpet has been thoroughly vacuumed to remove all loose dirt and debris. Once the area is clear, take your prepared DIY carpet cleaning solution in the spray bottle. Hold the nozzle approximately 6 to 12 inches away from the carpet surface. Apply an even mist across the entire section you plan to clean. The goal is to dampen the carpet fibers without oversaturating them, allowing the solution to penetrate and begin breaking down embedded dirt and stains. Pay extra attention to high-traffic areas or visible stains, giving them a slightly more concentrated spray. Allow the solution to dwell for 2-3 minutes to work its magic.

9.4K views789
Transcript
Hide

okay with the vacuuming done now it's time to turn my attention to the carpets where I already know that it's unlikely I can get them looking perfect again like I mentioned earlier the carpet in here is really poor quality so that coupled with the fact that it's been abused as badly as it has been means this is probably an unwinable challenge but I'm still going to give it my all and make sure I agitate really well with the drill brush to try to get everything loosened up and I'll of course repeat the process as many times as I have to

Auto-generated transcript. May contain errors.