Skip to main content

Install Handrail Brackets and Rail — Install New Handrails

Beginner3 mins

Part of project

How to Make Stairs Safer After Knee or Hip Surgery · Step 1 of 2

Helpful?

In this video

Pre-drill pilot holes for the bracket fasteners into the center of each marked stud to prevent splitting. Attach the first handrail bracket (Bold Manufacturing Handrail Brackets are shown) to the top stud, using only one screw initially. Position the handrail onto this first bracket, aligning it with the marked line on the wall. While holding the handrail in place, pre-drill pilot holes into the handrail through the bracket's screw holes. Secure the handrail to the first bracket with screws. Proceed down the staircase, aligning each subsequent bracket with the handrail and the marked line. Pre-drill and attach each bracket into its respective stud, then attach the handrail to each bracket. By securing one screw in each bracket first, you can make slight adjustments before fully tightening all fasteners. Once all brackets are in place and the handrail is attached, ensure all screws are tightened securely.

444.0K views5.1K
Transcript
Hide

purpose type of application because if I want a beautiful buttery smooth finish on both the top and the bottom but I do have to be mindful of the fact that we have flat brackets they're going to be installing the bottom as well as LED lighting that has to have some type of flat surface to adhere to

Auto-generated transcript. May contain errors.