Skip to main content

Affix Lights with Adhesive — Install Lighting Fixtures

Beginner4 hours

Part of project

How to Light Basement Stairs Without an Electrician · Step 4 of 6

Helpful?

In this video

Starting from your chosen beginning point (e.g., near an outdoor outlet on the patio), carefully peel off the protective backing from the adhesive strip on each individual light fixture. Press the light firmly onto the cleaned soffit or eaves, making sure it adheres securely. Work your way along the planned path, striving to keep the lights in a straight line and maintaining a consistent distance of approximately 2 to 4 inches from the edge of the house. The video demonstrates pulling the string taut before pressing each light. If a light is misplaced or not straight, you can carefully pull it off and re-stick it. Utilize the extra sticky pads provided in the kit if any adhesive loses its tackiness during re-positioning.

1.9K views147
Transcript
Hide

know and then you can start peeling the sticky bags from the back of the lighting making sure you're staying within 2 to 4 in from your home and then every now and then you know you may have a little you know one that's not straight it's okay you can just pull it off and rest stick it on there's also some extra sticky bags in the bag just in case um you uh kind of damage one if you have to pull it off and stick it back on I it's no issue all you have to do is just get one of the replacement stickies and just stick it right back on your home so this took us a few hours to get done because you know you have to make sure that you're putting that you know your lights up straight you don't want any zigzags and any S's and stuff like that because trust me that will show Once you turn on your lights at night we did run into a couple couple of

Auto-generated transcript. May contain errors.