Skip to main content

Position Gate and Check Initial Gap — Position Gate and Adjust Height

Beginner2 hours

Part of project

How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 4 of 6

Helpful?

In this video

Carefully lift the assembled gate and place it into the doorway opening. Position the gate so that it is centered within the opening and the bottom bar is as close to the floor as possible. Observe the gap at the bottom of the gate; it should be very small, ideally less than 3mm (0.12 inches). This small gap is necessary for the gate to function correctly and is not a flaw.

463.0K views690