Skip to main content

Sand and Final Clean — Sand the Treads and Risers

Beginner8 hours

Part of project

How to Remove Carpet Stair Treads Without Damaging the Finish · Step 8 of 9

Helpful?

In this video

Once the treads are completely dry, proceed with sanding. Start with a coarser grit sandpaper, such as 120-grit, attached to an orbital sander (a Dewalt sander is shown) to smooth out any remaining imperfections or rough spots on the wood. Then, switch to a finer grit, like 220-grit, for a final pass to achieve a perfectly smooth surface. The video emphasizes getting all corners, crevices, and any areas where stain or finish will be applied perfectly smooth. Use an orbital sander connected to a HEPA filter vacuum (a Festool Cleantec vacuum is shown) to efficiently collect sawdust and minimize airborne particles. After sanding, meticulously remove all remaining dust from the treads to ensure a clean surface for the new stain and finish.

19.9K views123