Skip to main content

Sand the Staircase — Sand the Treads and Risers

Beginner8 hours

Part of project

How to Remove Carpet Stair Treads Without Damaging the Finish · Step 8 of 9

Helpful?

In this video

Once all risers, treads, and landing flooring are installed, it's time to sand the entire staircase. Begin with 80-grit sandpaper on a random orbital sander to smooth out any imperfections, remove glue residue, and level minor height differences. Work your way through finer grits, typically 120-grit, then finish with 220-grit sandpaper for a smooth, ready-to-finish surface. Use a detail sander or sanding block for corners and tight spots that the orbital sander cannot reach. Connect your sander to a dust extractor or shop vac to minimize dust, and thoroughly clean all surfaces with a tack cloth or vacuum before moving to the next step.

2.1K views60
Transcript
Hide

the Treads and install with the glue and 16 gauge nails use three quarter inch oak flooring for your Landings sand from 80 to 120 to 220 then take your stain and apply with a nice synthetic brush before you put on your top coat this is a floor finish Crystal Clear satin four coats and here is the

Auto-generated transcript. May contain errors.