Skip to main content

Patch Holes and Imperfections with Filler — Repair Minor Damage

Beginner3 mins

Part of project

How to Protect Stairs from Dog Nail Scratches · Step 3 of 5

Helpful?

In this video

Inspect all surfaces for nail holes, hardware holes, dings, scratches, or other imperfections. Apply wood filler (or Bondo for larger areas) to these imperfections, pressing it firmly into the holes and gaps. Allow the wood filler to dry completely according to the product's instructions (this can vary but usually takes a few hours). Once dry, sand the patched areas until they are perfectly flush and smooth with the surrounding wood surface. Use a sanding block or power sander as appropriate, ensuring no raised areas or depressions remain. Smooth sanding is critical, as any unevenness will be highlighted by paint. Remember to fill holes before the final paint coat; if you forget, fill it between coats and re-sand.

804 views46
Transcript
Hide

smooth we're coming to the end here the ninth issue we often find in almost every piece I flip is some type of holes that need patched whether you're pulling a nail out and you need to fill the hole whether it's Hardware you need to fill the hole or it's dings and scratches and nicks and such that you need to fill in this piece I only use wood filler you can use Bondo if it's a larger space that you need to fill I've shown those in other videos you need to fill the hole let the wood filler or whatever you're using dry and then sand it smooth sanding it smooth is also key it will not look good if you don't sand it flush to the piece or like me I forgot to fill the hole and once I put one coat on I had to come back and fill the hole but that's fine I still had a second coat there was no problem but fill your holes sand them smooth in preparation to paint the 10th repair we're going to

Auto-generated transcript. May contain errors.