Skip to main content

Prime the Concrete Surface — Prime the Surface

Beginner2 mins

Part of project

How to Resurface Worn Concrete Steps · Step 3 of 6

Helpful?

In this video

After the patched areas are completely dry (indicated by a lighter color), it's time to prime the entire concrete surface. First, tape off any adjacent surfaces (like walls or siding) with an orange waterproof tape to protect them. Prepare the Sure Bond 100 primer by mixing it 1:1 with water in a pump-up sprayer (e.g., Chapin 2000). Apply the diluted primer evenly over the entire concrete slab, ensuring thorough saturation. Immediately follow with a roller to mop up any puddles and ensure even distribution, preventing pooling. The goal is to achieve a 'Saturated Surface Dry' (SSD) condition, where the surface is fully saturated but no standing water is visible. For edges and corners, apply the primer with a paintbrush to ensure complete coverage. On very hot days, lightly misting the surface with water before priming can help reactivate the primer if it dries too quickly.

397.0K views3.7K