Skip to main content

Fabricate and Install Handrail Return — Secure Handrail Return to Handrail

Beginner4 hours

Part of project

How to Install a Handrail Return at the End of a Rail · Step 4 of 6

Helpful?

In this video

Measure and cut a piece of the handrail material (ensuring it's also been painted or primed to match the main handrail) to create a 'return' that connects the end of the handrail to the wall. This involves cutting the end of the main handrail and the return piece at opposing 45-degree angles to form a mitered corner, allowing the handrail to turn smoothly into the wall. Glue and use pin nails to secure this return piece to the main handrail. This step provides a finished look and prevents clothing from snagging on the end of the rail.

40.3K views3.3K
Transcript
Hide

but yeah, uh the handrails right here. It's all finished up. You can see I did do this off camera. I did a return. So you can see the one up here is a little easier to see. And to do that return, regardless of what your handrail is, you just cut the end of the handrail 45. Then you cut a return measuring from this point over to your wall. So I figured out figured that out by putting my handrail in place, clamped in place where it needed to be, and then taking a measurement from the outside handrail to the wall. And that's how I determined uh

Auto-generated transcript. May contain errors.