Skip to main content

Attach Mitered Returns — Install End Caps or Returns (if applicable)

Beginner5 hours

Part of project

How to Install a Handrail on Outdoor Concrete Steps · Step 7 of 7

Helpful?

In this video

Take the small cut-off pieces from each end of the handrail. These will serve as the 'returns.' Apply a small amount of wood glue to the mitered face of one return piece and align it with the corresponding mitered end of the handrail. Drill two small pilot holes through the return and into the handrail. Secure the return by driving two finish nails into the pilot holes, ensuring a strong, clean joint. Repeat for the other end of the handrail.

2.3M views8.1K