Skip to main content

Install Handrail Brackets — Install Handrail Support Brackets

Beginner8 hours

Part of project

How to Install a Handrail on a Spiral Staircase · Step 5 of 8

Helpful?

In this video

Using a laser level, project a straight line along the staircase wall at the desired height for the handrail. Mark the precise locations for the handrail brackets along this line, ensuring they align with wall studs for secure attachment. Drill pilot holes into the marked locations, deep enough to accommodate the screws for the brackets. Secure each handrail bracket to the wall using a drill and appropriate screws, ensuring they are firmly anchored.

40.3K views3.3K
Transcript
Hide

however it happens. You'll have to forgive the low light, but I want to show a couple of details. These are the handrail brackets. So, there's a single screw in the center, and then you can just drive it in. and leave it just a teensy bit loose. And then that you just pivot it. And that allows you to then put these two screws on uh in up into the handrail versus the tight that goes vertical. And then this little piece is like a loose piece that pivots to match the angle. This costs a couple dollars more to get these, but they're heavier duty. They look better than that sort of economy handrail uh bracket and it's easier. And so I think that little bit of ease to where you just make sure you get them all in the same line and then just rotate that to the right angle to match your handrail is a much better way to go about it. Uh it is relying on just a single screw, but it's a nice heavy duty screw. And I went with four. And that's just the spacing of the studs in this house. It's like weird uneven big spacing 2 ft. Um but yeah, uh the handrails right here.

Auto-generated transcript. May contain errors.