Skip to main content

Connect New Fixture's Electrical Wires — Wire the new light fixture

Beginner2 hours

Part of project

How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 4 of 6

Helpful?

In this video

Before making connections, verify once more that the power is off using your voltage tester. Connect the new fixture's wires to the corresponding house wires. Twist together the bare copper ground wire from the fixture with the bare copper ground wire from the ceiling box, then cover with a wire nut. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the ceiling box, and secure with a wire nut. Finally, connect the black (hot) wire from the fixture to the black (hot) wire from the ceiling box, securing with a wire nut. Ensure each connection is firm by gently tugging on the wires.

846.9K views3.7K
Transcript
Hide

wire will be connected to that bare wire to give mine a little twist to get it started wrench that down pretty tight until the wires start twisting and then you want to give it a pull to make sure nothing comes loose because that would be a bad connection and that's what causes fire black lead all right and now all we have to do is our two bare wires make sure it's a positive connection all we have to do is feed this back up in through the center and as you can see these are all firm connections let's go ahead and feed that up and feed the rest of this up then we just have to line up the screws on the sides you'll see right there and that one's finished

Auto-generated transcript. May contain errors.