Skip to main content

Finish Baseboards (Fill, Caulk, Paint) — Fill Nail Holes and Caulk Gaps

Beginner8 hours

Part of project

How to Install Baseboard Along a Staircase Wall · Step 8 of 9

Helpful?

In this video

Once all baseboards are securely installed, the final step is to finish them. Use wood filler to fill all visible nail holes and any minor imperfections in the wood. A helpful tip is to use a wet wipe or damp cloth to smooth out excess wood filler immediately, reducing the need for extensive sanding later. Next, apply a continuous bead of caulk along the top edge of the baseboards where they meet the wall, and also fill any remaining small gaps in the mitered corners. Smooth the caulk bead with a wet finger or a caulk tool. Allow the caulk and wood filler to dry completely as per manufacturer instructions. Finally, paint the baseboards. While freehand painting is possible, for a cleaner line, you can tape off the floor and the wall above the baseboard before painting.

2.2K views144
Transcript
Hide

Yeah. Let's put it together. So, I'm going to start with this scarf joint right here. And I'm going to actually use some painters tape to hold these joints in place for just a little bit. And now I do want to add at least one nail. And this pushed this out. So, we're going to push it back in. But here, anyway, we want to use inch and a quarter nails. Take the tape off. And we have a pretty nice joint. Okay. So, once again, I'm going to use wood glue right here. Make sure there's enough glue on it. Hold it in place for a little bit. Use some tape. That's going to hold it in position. Now, the reason I am taping it rather than nailing it is because usually at the bullnose corners, they use metal sheets to give the corner the shape. And so, you really cannot nail into that. So, instead, I'm just going to use the tape to hold everything in place to dry up. And I'm going to nail all around it. You can see there's a little bit of a gap there. So, popsicle sticks for the rescue. And once the wood glue dries, which is about half an hour, we've got a nice corner. All the baseboards are attached. So now it's time for the final finish. I filled out all of the nail holes with wood filler. And here's a little trick so you don't have to sand a lot. Just use a wet towel to wipe away all of the excess wood filler. I added a bead of cocking all along the baseboards. And to be honest, this is the most satisfying part to me. And when everything was dry, I painted all the baseboards. Now, I am comfortable just doing this freehand, but if you like, you can totally tape off the floor and the wall to get that nice crisp line. And there you have it. Super easy, professional looking results and really beginner friendly. It took me about 6 and 1/2 hours of active work time to do this. Of course, I am also recording video and that just makes everything take a lot longer because I'm adjusting the camera angle, making sure everything's visible. So, everything takes a lot longer. So, I think you could easily do this room in like 3 3 and 1/2 hours. But, a couple things to remember. If you are using a miter saw, make sure that you align it before you start working on this project because that is going to save you so much frustration. And number two, do not assume that the walls are straight at all. Do not assume that the walls are at a 90°. Make sure that you account for the variation. And those popsicle sticks make it so easy to get those clean corners. If you have any questions, leave…

Auto-generated transcript. May contain errors.