Skip to main content

Fix with A35 Brackets (Method 1) — Reinforce with Stair Tread Repair Brackets

Beginner3 hours

Part of project

How to Stop a Stair Tread from Creaking and Shifting · Step 4 of 5

Helpful?

In this video

The first method involves using a standard metal bracket, such as an A35 angle bracket, and screws. To effectively pull the tread back into the stringer's dado, the bracket must be positioned about 1/2 inch to 1 inch back from the edge of the tread. This creates a leverage point to draw the tread inward. Before installing, inspect the dado for any existing nails or screws that might obstruct the tread's movement; these should be removed if possible. While fastening, carefully monitor the tread's movement. If significant force is required or the tread is severely loose, consider using multiple brackets per tread or on adjacent treads to distribute the pulling force. It is crucial to simultaneously monitor the opposite side of the tread to prevent it from pulling out of the other stringer's dado.

41.5K views266