Skip to main content

Add Dimensions and Export Drawing — Document All Measurements

Beginner2 hours

Part of project

How to Measure Stairs That Are Different Widths · Step 8 of 8

Helpful?

In this video

The final step is to add dimensions to the drawing, making it usable for framers. Use the 'Dimension' tool ('D' shortcut) to add relevant measurements. Start by dimensioning the rough floor-to-floor heights. Then, add dimensions for the landing depth and the total run of each stringer section. Crucially, also add dimensions for the individual riser heights and tread depths, ensuring they are consistent throughout. Highlight the horizontal and vertical distances from a fixed point (like the wall) to the rough framing edges of the landing and stringers. This provides all necessary information for the framers to build the staircase accurately and to code. Once dimensioned, the drawing can be exported as a PDF or image for sharing.

9.1K views323
Transcript
Hide

shift 8 10 so now you can see now we have risers going all the way across here and i got one extra down here which i'll just delete now i want to draw in my treads my treads will be one inch thick one l for line they're going to be 11.5 inches and as you can see that will give me an inch and a quarter of nosing which you can see down here in this bottom corner it says length and then it's got this window that's where it tells you your selected measurement inch and a quarter so select the face double click g for component second floor treads i guess all these treads will actually be exactly the same m for move control for copy shift eight for asterisk hit the nine okay now you can see what happened here as i hit that repeat nine you can see that it put my tread right here now why is that that is because i haven't accounted for the thickness of my tread by cutting off the bottom of the stringer which is very important so what happens is if you don't account for the thickness of your tread whenever you're framing a stair you'll end up with your first step being way too big and your last step will be way too small so as you can see as it is right now if i hit the d for dimension my total step height would be over eight inches right here and if i come up to the very top my step height is only a little over six inches that's because i haven't dropped the entire thing one inch to account for the thickness of the tread so what we're going to do is i'm going to delete that and then i'm going to select all of this stuff and i'm going to turn it into one component or group then we can move it all down at the same time there everything is selected now i'm going to hit m for move i'm going to move everything down one inch for some reason it didn't select that very top tread so i will move that down also so now you'll notice what happened now my finished floor height that's a let 7 and 11 64. and if i come up here to the top my finished step height is 7 and 11 64. that's extremely important that we have the reason we're taking all this flooring into account is so that as we step from our landing to our first step and from our last step up on to the finished floor carpet we have the same rise on all those steps it's really important now one detail that you will see here that i need to change now that we've gotten to this point is i want my framing stringer to actually sit down on the finished framing so i can adjust the height of my stringer right here so that it will…

Auto-generated transcript. May contain errors.