Skip to main content

Measure Total Width of Stair Opening — Measure Stair Width

Beginner2 hours

Part of project

How to Measure Stairs That Are Different Widths · Step 7 of 8

Helpful?

In this video

Measure the total width of the opening where the stairs will be installed. If drywall or other wall coverings will be added, account for their thickness. For example, if the rough opening is 37 3/8 inches and there's 1/2 inch drywall on one side, the effective width for the stairs is 36 7/8 inches. The presenter opts to make the stairs 36 inches wide to allow for slight clearance and easier installation, knowing that finished flooring (like vinyl plank) will butt up against the wall finishes after the stairs are in place.

9.2K views429
Transcript
Hide

so we've got 100 4 in total rise okay uh width widthwise here uh I'm going to be putting half inch drywall on here I've already got half inch drywall on this side so let's just see what we have for a width we've got 37 and 38 yeah 37 and 38 so - half an inch is 36 and 78 I'm going to just make my stairs at 36 in that way there's no fighting to get them in my flooring can be finished right to the wall afterwards anyways the flooring that goes on the stairs so if there's a slight gap of a quarter inch or 15 16 or whatever uh well not 15 16 but uh4 inch to say 38 on each side most floor you can just make that work out anyway so okay so I'm going to go 36 in wide for my total stair width um now my uh with with these measurements I can go and figure out how many risers I'm going to have which will give me how many Treads I'm going to have you always have one less tread than risers and uh we can figure out where

Auto-generated transcript. May contain errors.