Skip to main content

Prepare Surface with Scuff Sanding or Bonding Primer — Apply a High-Quality Bonding Primer

Beginner3 mins

Part of project

Paint Stair Risers · Step 2 of 4

Helpful?

In this video

Proper surface preparation is crucial for a durable paint finish. For painting, you need to scuff sand the surface or apply a bonding primer. The video first demonstrates scuff sanding on a dark dresser using a 150-180 grit sanding sponge. Light pressure is applied, as the goal is to gently abrade the surface for adhesion, not to remove the existing finish entirely. Alternatively, a bonding primer can be used as a dust-free option. The video uses Dixie Belle's 'Bonding Boss' (a water-based bonding primer) poured into a paint tray lined with a plastic bag. This primer adheres to various surfaces like glass, plastic, mirrors, metal, and existing finishes. Apply the primer with a 4-inch roller for larger flat surfaces. For detailed areas, an inexpensive chip brush can be used. After applying the bonding primer, wait 24 hours before painting. Always watch for and smooth out any drips or excess product with the roller or brush before it dries, especially in corners or grooves, as wet corrections are much easier than dry ones. For detailed moldings, apply primer by dabbing or 'pouncing' the brush to ensure coverage in all crevices, then smooth any excess.

7.2K views207
Transcript
Hide

exactly where I wanted them and then blasted them with a little more heat to adhere. Here's beginner tip number three and it has to do with sanding and I'm going to demo this on another piece of furniture because the French provincial piece was done with the no sand method which I'll be sharing in a moment. Sanding furniture before painting it is a real pain point for a lot of you and I know this because I felt the exact same way when I first started doing my furniture makeovers I felt it was very intimidating messy I labor in terms of I just didn't want to do it. Having said that scuff sanding doesn't have to be and I strongly suggest you need to do something to your furniture makeover before you apply primer and or paint because you really don't want to put in all this work to a furniture makeover and then have it start scratching off or flaking off you really want good adhesion so your furniture makeover lasts for years and years to come. So here are two ways to do this the inexpensive way is to give it a scuff sanding using a 150 or 180 grit sandpaper you can just wrap it around a wood block or not just use the sandpaper and wipe down that surface as you would your kitchen counter I know that sounds funny but it doesn't need a whole lot of pressure all you're doing here is just scuffing up the surface lightly so your primer and or paint will adhere the second choice which is a lot of beginners choice although this does cost some money is a bonding primer there's no mess here and it adheres a good bonding primer such as BIN shellac based primer I'll add a link in the see more box down below and also I'll add links to all these products in the see more box down below so if you'd like to give them a try they're easily accessible for you so bonding primer you could do BIN shellac based primer and or a water based version which I'm using here it's called bonding boss this primer will adhere to glass plastic mirrors metal and certainly the finish on a French provincial dresser I like applying it with a four inch roller and an or and or an inexpensive chip brush and the caveat here to using this bonding primer the water based version is you have to wait 24 hours before you start painting but this is a great solution to prepping your furniture so the painted here is it'll last a long time to come and you don't have to worry about any flaking off scratching off etc and of course this is the dust free version you don't have to worry about dust in your home…

Auto-generated transcript. May contain errors.