Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Drill Pilot Holes for a Strong Hold

Choose a drill bit that's slightly smaller in diameter than the lag bolts that came with your mount. This is key for a tight, secure fit. Carefully drill a straight hole at each of your marks, directly into the center of the stud. Make sure the hole is deep enough for the entire lag bolt.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Drill Pilot Holes for a Strong Hold

Choose a drill bit that's slightly smaller in diameter than the lag bolts that came with your mount. This is key for a tight, secure fit. Carefully drill a straight hole at each of your marks, directly into the center of the stud. Make sure the hole is deep enough for the entire lag bolt.

Videos for this step

Pre-Drill Pilot HolesInstall Wall MountInstall TV Wall Mount (Part 1)

Tools and Materials

← Project

Wall-Mounted Television Installation

Step 4 of 8·1 hr left

Choose the Right Mount for Your TV
30 minutes2 items
Locate Wall Studs for a Secure Anchor
15 minutes2 items
Position and Mark the Mount Placement
10 minutes3 items
4
Drill Pilot Holes for a Strong Hold
15 minutes3 items
5
Attach the Wall Plate
10 minutes3 items
6
Attach Brackets to Your TV
15 minutes4 items
7
Hang the TV on the Mount
10 minutes2 items
8
Secure and Adjust for Peace of Mind
10 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.