Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Test for Leaks and Diverter Function

Turn the water supply back on and carefully check for leaks around the base of the new spout. Test the diverter by switching between the tub spout and shower head to ensure it's working correctly. Address any leaks immediately.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Test for Leaks and Diverter Function

Turn the water supply back on and carefully check for leaks around the base of the new spout. Test the diverter by switching between the tub spout and shower head to ensure it's working correctly. Address any leaks immediately.

Videos for this step

Test for LeaksTest for LeaksRestore Water and Test

← Project

Tub Spout & Diverter Installation: A DIY Guide

Step 6 of 6·5 min left

Shut Off Water Supply
5 minsBeginner
Remove the Existing Tub Spout
15 mins1 itemsIntermediate
Prepare the Copper Pipe
5 mins1 itemsBeginner
Apply Plumber's Tape
5 mins1 itemsBeginner
Install the New Tub Spout
10 mins1 itemsIntermediate
6
Test for Leaks and Diverter Function
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.